العربية
Description
OKM ROVER UC METAL DETECTOR WITH SMARTPHONE
UNDERCOVER METAL DETECTOR
The 3D metal detectors of the Rover Series are not only simple metal detectors with audio output. Furthermore, it is possible to create excellent three-dimensional graphics of the scanned underground. Due to the approved Single-Sensor-Technology, those detectors are optimally applicable for detecting hidden objects.
Rover UC is a new generation of metal detecting technology that allows the introduction of a new deep-seeking detector – smaller, lighter, and more compact than previously built detectors. The unit is controlled via smartphone, hence does not require a computer to see buried items.
The Rover UC metal detector is disguised as a walking stick and allows searching in areas where you couldn’t with common detectors. Without arousing public interest and getting curious looks, you can scan places you never could scan before.
POWERFUL TECHNOLOGY
The Rover UC is based on the well-proven, reliable and powerful technology of the Rover Series, in which many details have been optimized and improved. Thus the multifunctional Rover UC metal detector is able to locate buried items like gold, silver, chests, and boxes as well as hidden rooms, graves, and tunnels. So the Rover UC metal detector is suitable for every undercover treasure hunt.
BENEFITS OF ROVER UC
small, light-weight, and made to look like a trekking pole
disguised as a hiking stick with integrated FM radio
smartphone as detector controller and display for the 3D graphics
no computer necessary
incl. metal discrimination between ferrous and non-ferrous metals
pre-configured and ready to go, out of the box
uses standard batteries (AA batteries available everywhere!)
The length of the trekking pole can be adjusted individually because of its telescopic mechanism and is equipped with an integrated FM radio. Thus, the Rover UC metal detector is usable as a functional multimedia-based hiking stick to bring its camouflage to perfection. Due to modern processors and energy-saving components, two standard AA batteries are enough to supply the full power of the detector.
FUNCTIONALITY OF THE ROVER UC
Visual magnetometer to locate ferromagnetic metal objects underground
Visual 3D ground scans with manual and automatic impulse mode (graphical ground scans with three-dimensional analysis directly on the smartphone)
Visual metal discrimination between ferrous and non-ferrous metals
Like all other metal detectors of the Rover Series, the Rover UC is a stunning blend of functionality, ergonomics, and practical design. Due to its small weight of just 0.65 kg, you can take it everywhere you want. By using just one button you can manage all operating modes.
3D ANALYSIS OF MEASUREMENT DATA
The 3D software for analyzing the graphical measurements has been integrated completely into an Android smartphone, so you don’t need any computer for data analysis, also dramatically reducing the weight. Based on the processing power of today’s smart phones our engineers and software developers created an easy-to-use high-tech 3D ground scanner. It offers everything necessary to quickly and efficiently process measurements. As a result of its handy touchscreen, you can rotate, zoom and resize all of the displayed 3D graphics by just using your finger.
INCLUDING ANDROID SMARTPHONE
The smartphone is shipped unlocked, so if you place your own SIM card into the SIM-lock-free Android smartphone you are able to not only scan with Rover UC but use it as a normal phone with all its functionality like Internet access, contacts, administration, as well as any other installed application.
LANGUAGES
The smartphone user interface and the OKM application is available in the following languages:
English
Français
Deutsch
Español
Ελληνικά
Türkçe
Italiano
Nederlands
Pусский
فارسی
عربي
INCLUDING VISUALIZER 3D SOFTWARE
All measurements can be instantly analyzed on-site. If required you are able to save and reopen all graphics on the smartphone for further analysis if necessary. For those who still wish to use a PC, the Rover UC scan images are fully compatible with our Visualizer 3D software.
Measured data of the metal detector Rover UC can be transferred to any computer via smartphone USB cable. After transferring the data, scans can be analyzed with the Visualizer 3D software. This makes it possible to get exact information about the size of the buried or sub-surface object. Fine scans can show precise shapes of the target when measured and recorded in High Definition mode.
Graphical 3D ground measurement with manual and automatic pulse triggering: After measuring the target area, a three-dimensional graphic is created that can be evaluated directly on the smartwatch display. For a detailed representation, the scan file can be transferred to the notebook and analyzed in the Visualizer 3D Studio detection software.
Magnetometer
Magnetic field measurement to find metallic objects in the subsurface: The Magnetometer operating mode is used to acquire a quick overview of the target area. It is recommended that the location is cleared of unwanted metal objects using the Magnetometer before performing a 3D Ground Scan.
Pinpointer
Basic target identification and visual metal discrimination between ferromagnetic and non-ferromagnetic metals: With Pinpointer, detected objects can be localized even more precisely and the type of target can be determined more easily.
| Technical Specification Name | Technical Specification Value |
| COMPUTER MINIMUM REQUIREMENTS | |
| CD-ROM Drive | Minimum 4x |
| Interface (Data Transmission) | USB |
| Free Disk Space | Minimum 50 MB |
| Working Memory (RAM) | Minimum 256 MB |
| Graphics Card | Minimum 128 MB, OpenGL-compatible |
| Processor | Minimum 1.2 GHz |
| Operating System | Windows Vista, Windows 7, Windows 8, Windows 10 |
| DATA TRANSMISSION | |
| Technology | Bluetooth |
| Frequency | 2.4 – 2.4835 GHz |
| Maximum Transfer Rate | 1 Mbps |
| Receiving Sensitivity | –85 dBm |
| Maximum Range | Approx. 10 m |
| TELESCOPIC PROBE | |
| Dimensions (H x W x D) | 730 – 1400 x 40 x 60 mm |
| Weight | About 0.65 kg |
| Operating Temperature | –10°C – 50°C |
| Storage Temperature | –20°C – 60°C |
| Waterproof | No |
| Processor | Dual-system, Atmel AtMega CPU, 20 MHz |
| Voltage | 2x AA Primary battery (1.5 V, 2600 mAh) or 2x Rechargeable NiMh (1.2 V, 2600 mAh) |
| Operating Time | About 10 h |
| Air Humidity | 5% – 75% |
| Sensor Technology | SCMI-15-D |
| Technology | GST / EMSR |
| Interconnect | Bluetooth, Class 2 |
- Wireless Telescopic
- Probe (Sensor)
- Samsung smartphone
- USB cable
- charger
- Carry Bag
- DVD contains instructions for video
- 2 AA Batteries
- User`s Manual
